The Chelmsford Workshop
With a generous eaves height and ridge height, this type of workshop will cater for most requirements.
FOR FULL SPECIFICATION SEE BELOW
- Good Height Throughout
- Many Door Options Available
- Side Aspect Interchangable Windows
- Onduline as Standard
- Apex Design
- Fully Customisable on Request
- Optional Extras Availabe
- Finance Available
Delivery
CUSTOMISE YOUR SHED
- Good Height Throughout
- Many Door Options Available
- Side Aspect Interchangable Windows
- Onduline as Standard
- Apex Design
- Fully Customisable on Request
- Optional Extras Availabe
- Finance Available
- 100% Pressure Treated Timber Throughout
The 100% Pressure Treated Chelmsford Workshop is our most common type of Workshop for those who require the door or Double Doors in the shortest Gable End and Windows in the longest Eaves Section. With a generous eaves height and Ridge height, this type of workshop will cater for most requirements. (see specification)
The Treated Workshop is made using 100% Pressure Treated Redwood and includes a T & G Roof and Floor and includes a Tyvec Vapour Barrier between the Framing and Cladding.
NUMBER OF WINDOWS AS STANDARD VARY DEPENDING ON THE SIZE AND DOOR POSITION; IF UNC LEAR DO NOT HESITATE TO ASK US.
- 100% Pressure Treated Timber 12mm Shiplap Throughout
- 12mm T&G Floor and Roof
- 63mm x 38mm Framing
- External Eaves Height 2140mm
- Internal Eaves Height 2030mm
- Diagonal Supports
- Lined With Tyvek House Wrap
- Joinery Made Windows With Cills
- 4mm Toughend Glass
- Joinery Door
- 3-Lever Lock and Handle
- Galvinised Door Furniture
- Onduline as Standard
- Heavy Duty Fascia Boards
- Uprated Corner Profiles
We only use the best quality slow-grown Red Spruce Timber from our partners in Sweden.
All of our timber has been penetrated with wood preservative to enhance protection in terms of the prevention of rot, decay and insect and fungal attack. If timber is left untreated, the quality can deteriorate rapidly over time as a result of exposure to the elements of weathering and moisture.
Despite the care we take in importing & Pressure treating the best timber possible, all timber is porous and therefore can absorb water, swell, shrink, crack and twist throughout its lifespan.
However, together we can help minimise these. These include:
- Double Nailing
We use Stainless Steel Nails double nailed in each board in each upright to help minimise movement and twisting - Uprights
We use strong timber at close intervals to support the timber cladding. - Water Repellent Treatment
You can customise the building with a colour of your choice or decide to keep it clear, but all cladding timber will need a water repellent treatment to help stop water penetration and moisture build-up. Moisture build-up will occur naturally especially during winter months and in some cases will cause dampness and mould. Water repellent treatment will help minimise this and if any mould occurs, this can normally be remidied by wiping clear with a mild bleach soultion and ventilating the building when possible. - Regular Maintenance
Your Building should be reletively maintenance free, however as with everything it does need to be kept an eye on! When the building does move slightly throughout the year, doors and windows may need adjusting. Windows have been silicone sealed on manufacture but may need resealing if required.
Dont be afraid to lubricate locks & hinges. Being out in the elements is a strain on all materials!
Keep an eye on roofing materials. Felt will particuarly need keeping an eye on, although we provide a good quality material, felt again does contract and expand during the seasons and over time can tear and crack. Once this happens it is more likely the shed will start to leak. Therefore replacement will be necessary.
Other roofing materials we offer do offer some sort of warranty, so if you feel your building is leaking from the roof, please get in touch for advice.
Enter your postcode to see if you qualify for free delivery.
